This Display Shelf for Diecast Model Cars & Trucks is an aluminum display shelf that measures 48″ long X 3″ deep. They are a self-contained, floating shelf to display your collectible 1:43 & 1:64 scale models & other collectibles too. Our unique design allows you to butt them together to span any length you need. The engineered design is heat treated for strength with an anodized finish that is durable and easy to maintain. This reversible shelf is great for other collectibles, crafts, garage and shed storage, matchbox cars, etc. MOUNTING HARDWARE AND END CAPS SOLD SEPARATELY. Furthermore, our shelves are not pre-drilled. We suggest you mount your shelf at 16” on center to the wall studs.
Find the perfect cars to display on your shelves such as Diecast Direct and other great model stores.
**CUSTOM CUTTING is available for your 48″ display shelf (to smaller lengths) for $2 per shelf. You will receive the cutoff if they are larger than 12″. This allows you to butt pieces together to span an area, or fit smaller shelves into small spaces.
MrTrain.com shelves are easy to install. You will need the following tools:
- An electric drill
- 3/16″ drill bits
- A Level
- Mounting Hardware
- Spacing Blocks
Spacing blocks should be as high as the distance between the shelves, generally between 5-1/2″ or 6″. Studs are usually located 16″ or 24″ apart on center. Electrical outlets are generally attached to the side of a stud, which is the easiest way to locate one. They may also be found with a magnetic stud finder.
Installation Instructions
Using the level, draw a line on the wall where you would like the bottom shelf to be located. Locate the studs along this line. Mark the stud spacing and transfer the marks to the back of the shelf. Using the 3/16″drill bit, drill holes in the shelf from the back.
Using the mounting hardware, install the shelf on the wall line once you have drilled holes through 1 inch lip to align to your wall studs. Attach to the wall by aligning holes to studs and screw directly in.
Once the bottom shelf is fastened, place the spacing blocks on the top of the rails, equal distance apart. Place the next shelf on top of the blocks and mark where each fastener hole is to be drilled. Remove the shelf, drill the holes in the shelf and in the studs and attach the second shelf.
Continue installing the shelving by using the spacing blocks until installation is complete.
Reviews
There are no reviews yet.